-
-
Pphofman replied to the thread clicks and clock adjustment too large.Please what does the USB two clock problem actually mean?
-
Pphofman replied to the thread clicks and clock adjustment too large.Then it does look like a problem with your system, unrelated to REW.
-
Pphofman replied to the thread clicks and clock adjustment too large.If that "exclusive" mode means wasapi exclusive, IMO there should be no clicks caused by separate clocks for each direction. But the...
-
Pphofman replied to the thread clicks and clock adjustment too large.First I would suggest to configure REW to use EXCL in both directions, to avoid any interference from the windows mixer.
-
Pphofman replied to the thread clicks and clock adjustment too large.I do not know your current REW setup. But the config screenshot you posted in...
-
Pphofman replied to the thread clicking every second from my jig to make Small Thiele parameters Measurement.:T
-
Pphofman replied to the thread clicking every second from my jig to make Small Thiele parameters Measurement.Alternatively you could use a classical linear amp, e.g. LM3886 modules from aliexpress cost around 20USD.
-
Pphofman replied to the thread clicking every second from my jig to make Small Thiele parameters Measurement.Or theoretically you could use line-in input (not the mono microphone), connect each voltage divider to L/R channel of the line-in jack...
-
Pphofman replied to the thread clicking every second from my jig to make Small Thiele parameters Measurement.IIUC the circuit you connect to the amp output works only for non-bridged amps which have the "negative" speaker output connected to...
-
-
Pphofman replied to the thread about ASIO4ALL.Did you disable your UMC22 card in pulseaudio? Did you chose the UMC22 card in java driver of REW? Did you check the card controls...
-
Pphofman replied to the thread about ASIO4ALL.ASIO4ALL is a bridge between ASIO API and standard windows audio interface. It allows multichannel transfer and bypassing windows mixer...
-
-
Pphofman replied to the thread REW+WIN10+ASIO4ALL PROBLEM.Yes - e.g. the documentation https://www.roomeqwizard.com/help/help_en-GB/html/calsoundcard.html#multichannel
-
Pphofman replied to the thread REW+WIN10+ASIO4ALL PROBLEM.Did you try Wasapi exclusive (the JAVA -> EXCL: devices) instead of the ASIO4ALL workaround?
-
Pphofman replied to the thread clicks and clock adjustment too large.It looks MS messed up something around their USB stack, breaking flow of isochronous transmissions (people seem to complain about...
-
Pphofman replied to the thread REW Beta Release Testing REW to RPi 5 in "Gadget Mode" running CamillaDSP.IMO this issue is not related to REW, but to the way a DSP application is being run on the gadget side of the USB link. Windows mixer...
-
-
Loading…
-
Loading…
