-
-
moedra replied to the thread Cross Correlation and Vector Average Measurements.If you make correction filters from vector average responses instead of dB or RMS responses, there will always be differences because... -
moedra replied to the thread convolution room correction and room curve.My response featured a typo, which I have fixed. It said that FDW will ignore the dips. What I meant to say was that the FDW will not...
-
moedra reacted to linuxonly's post in the thread convolution room correction and room curve with
Like.
Thanks for the detailed explanation. Totally makes sense. It's my home theatre. 6 channels. For my stereo I didn't bother. -
moedra replied to the thread convolution room correction and room curve.The problem with FDW in Room EQ Wizard is that it is applied without a psychoacoustic treatment ahead of it. This may be appropriate in...
-
moedra replied to the thread Fighting to EQ +20dB room gain below 60Hz.Typically I avoid boosting anything in the filter. Try lowering your target or adding more EQ bands. Either that or, if you use a...
-
moedra replied to the thread Before EQ and after EQ measurements - please advise if this is correct.No difference at all? That's strange. What does your system configuration look like?
-
moedra replied to the thread Spectrogram worse after applying filters.I think the spectrograms look "worse" because the range is shifting based on the highest SPL in the measurement. It looks like the whole...
-
moedra replied to the thread Free Convolvers for my Audiolense convolution for Windows.Interesting. With the setup I use (the one I typed up in the guide) I haven't needed to use that feature. Everything works great. I'll...
-
moedra replied to the thread How to evaluate my DIY bass traps correctly with REW measurements?.It looks like your traps are mostly effective from 160Hz and up. They aren't doing much below that. Either they aren't thick enough...
-
-
moedra reacted to DanDan's post in the thread Before EQ and after EQ measurements - please advise if this is correct with Like.
Are you Measuring One Speaker or Both Together? https://www.irishacoustics.com/forum/measurement-and-control/acoustic-measurement-primer
-
moedra replied to the thread Free Convolvers for my Audiolense convolution for Windows.You should look into using Voicemeeter (either Banana or Potato) and a VST plugin host like Hang Loose to run your system audio. I have...
-
moedra reacted to juicehifi's post in the thread Advice on FIR Filters with Audiolense XO and Setup Considerations with Like.
HI, The umic in combination with USB dacs quite often leads to glitches in the measurements, which leads to timing errors in the...
-
moedra replied to the thread Before EQ and after EQ measurements - please advise if this is correct.If you do decide to follow my tutorial, my recommendation in the target design section is to place the target level somewhere between...
-
moedra reacted to linuxonly's post in the thread Before EQ and after EQ measurements - please advise if this is correct with Like.
Hi @blackhole You have more linearity in the highs. I would have expected a more extended bass response (you lost a lot of frequencies...
-
moedra replied to the thread Before EQ and after EQ measurements - please advise if this is correct.It's probably much better to do an inversion, but that requires convolution. Are you are implementing the filters as data typed into an...
-
-
Loading…
-
Loading…
