-
-
Wwhoareyou replied to the thread New Audiolense releases.Did a bit more testing and for #1 - If you add all speakers and then first save the setup before switching tabs, this seems to avoid...
-
Wwhoareyou reacted to vego99's post in the thread Correction of large format compression drivers with
Like.
Hey Steve, Tweeter is mounted in a big horn! lol. Here are a couple base line measurements I did when I first got them... -
Wwhoareyou replied to the thread New Audiolense releases.1) Seems like there are still some issues with the speaker setup. From Speakers tab; Adding speakers from the drop down and then...
-
Wwhoareyou replied to the thread New Audiolense releases.Quick test of 27 and so far it seems good. Thanks
-
Wwhoareyou replied to the thread New Audiolense releases.Understood. But it still seems a bit odd that if you create i.e. a 5.1.4 configuration that the routing matrix is 2.0 and not the 5.1.4...
-
Wwhoareyou replied to the thread New Audiolense releases.@juicehifi With latest version, after creating a new setup for Atmos 5.1.4 (I didn't try other setups), the routing matrix for the...
-
Wwhoareyou reacted to Urs's post in the thread Replaced my UMIK-2 mic with an Earthworks M23R... I'm confused with Like.
Hi @juicehifi and all interested I received my iSEMcon EMX-7150 last week, did the measurement with the new mic the day after. For this...
-
Wwhoareyou replied to the thread New Audiolense releases.Great! Not end of the world but would be much appreciated.
-
Wwhoareyou replied to the thread New Audiolense releases.Any chance you can implement a user configurable global background color for the graphs? This was discussed long time ago, and you...
-
Wwhoareyou replied to the thread Replaced my UMIK-2 mic with an Earthworks M23R... I'm confused.If you are in US try Rational acoustics. https://www.rationalacoustics.com/products/isemcon-emx-7150 If you are outside of US link...
-
Wwhoareyou replied to the thread Replaced my UMIK-2 mic with an Earthworks M23R... I'm confused.I had a UMIK-1 purchased from Cross Spectrum. Their calibration files had some significant differences from one provided by miniDSP...
-
Wwhoareyou replied to the thread Replaced my UMIK-2 mic with an Earthworks M23R... I'm confused.Is the UMIK-2 using miniDSP's provided configuration file or is this a calibrated microphone from 3rd party?
-
Wwhoareyou replied to the thread Cannot set up as 5.1.2, only 5.1 seen. (Photo).I have a 5.1.4 setup. I only have one SW, so not exactly same as your configuration. I started with the AL standard provided 5.1...
-
-
-
Loading…
-
Loading…
