Chris A
Latest activity Postings Albums About
-
-
Chris A replied to the thread Phase errors in REW.See Some Attributes of Linear-Phase Loudspeakers. The above document is found at the Linkwitz Lab site. It's kind of a smorgasbord of... -
Chris A replied to the thread Where were you 10 years ago?.[EDIT (11/3/2024): When I started on my current setup in 2007, I had already spent 25 years with a pair of Magnapan MG-IIIa's and some...
-
-
Chris A replied to the thread Loudspeaker step response looks unusual.In this case, do not use "Estimate IR Delay", since it will move the peak of the impulse response several milliseconds to the right (in...
-
Chris A replied to the thread Loudspeaker step response looks unusual.Within REW, that's the "SPL & Phase" plot, with dark background (preferences: preferences:view:colour scheme-dark), then: graph: 1/12...
-
-
Chris A replied to the thread Loudspeaker step response looks unusual.Note that drop-off in amplitude response above 10 kHz. I'd set the microphone vertical position to be centered on the high frequency...
-
Chris A replied to the thread Loudspeaker step response looks unusual.Here is a transfer function plot from your REW measurement file showing the amplitude and phase responses in-room as measured by the...
-
-
Chris A replied to the thread Loudspeaker step response looks unusual.If you look at your "RT60" plot, you will see that your room is basically not damped at all, with reverberation times around 0.9...
-
-
Loading…
-
Loading…
-
Loading…
