juicehifi's latest activity
-
juicehifi replied to the thread Audiolense for Car Audio.:T -
juicehifi replied to the thread Audiolense for Car Audio.The trial version allows for correcting 90 seconds of wave filed music, but only for regular stereo. In addition, you can save dummy...
-
juicehifi replied to the thread Audiolense for Car Audio.Hi there, You need Audiolense xo for this task. Audiolense does multichannel measurement, so all timing differences between drivers...
-
juicehifi replied to the thread Level of low shelf on targets, is very low bad?.I believe it should be OK as long as it is levelled out close to 0 Hz and close to FS/2. A steep drop at the extremes creates some...
-
juicehifi replied to the thread How can I get Audiolense to import .mdat files?.Glad to hear that, Joel. The logic is simply that I need to be able to verify the measurement behind a correction that is perceived as...
-
juicehifi reacted to joelha's post in the thread How can I get Audiolense to import .mdat files? with
Like.
Thanks very much for your reply, Bernt. In fact, only today, I started taking measurements using your software. I can not only see the... -
juicehifi replied to the thread How can I get Audiolense to import .mdat files?.Hi Joelha, This is not supported in Audiolense due to measurement quality consideration. It is very difficult to verify that REW...
-
juicehifi replied to the thread Measurement Sweep File - Pops, Clicks.This is with 99% certainty hardware related. But see if there's a way for you to increase buffer sizes. Also, lower sample rate may work...
-
juicehifi replied to the thread Step response - my drivers are not time aligned.Yes, perhaps it drops a bit early, but the shape looks good. Could you post a frequency response of measurement, simulation and target...
-
juicehifi reacted to sledwards's post in the thread Step response - my drivers are not time aligned with Like.
Found this on web:
-
juicehifi replied to the thread New Audiolense releases.That’s weird. I added 192k in the latest release just to be 100% before I replied.
-
juicehifi replied to the thread New Audiolense releases.You can still do this, you just have to include the frequency from the setup menu.
-
juicehifi replied to the thread Step response - my drivers are not time aligned.Actually, this is a very good looking result. The step response stays close to theoretical perfection all the way here.
-
juicehifi replied to the thread All else remaining the same, how likely is it that a different amplifier will create the need for a new DRC filter?.Highly unlikely for low distortion designs with high input impedance, which is what the majority of amps are. Esoteric tube amps should...
-
juicehifi replied to the thread Chart view, all speakers vs. single speaker when subs are in the setup.The sub acts as low frequency driver(s) for both left and right speaker. That's why it is included in the charts.