phofman's latest activity

  • P
    phofman replied to the thread HDMI vs SPDIF.
    OK, disable the device in PW first and check with 'lsof /dev/snd/*' that PW does not use any of the files related to card Generic (you...
  • P
    phofman replied to the thread HDMI vs SPDIF.
    The one used by the a52 plugin - Card Generic, Device 0 (or better the whole card Generic). I do not know which one is your Generic...
  • P
    phofman replied to the thread HDMI vs SPDIF.
    Very good, the speaker-test runs OK. But the aplay -L not listing: 1) Did speaker-test and aplay -L run under the same user? Of course...
  • P
    phofman replied to the thread HDMI vs SPDIF.
    AFAIK Fedora uses standard alsa. The access library alsa-lib is maintained by Jaroslav Kysela who is a RedHat employee - i.e. in charge...
  • P
    phofman replied to the thread HDMI vs SPDIF.
    Did you use the simple form I posted, and placed it into ~/.asoundrc ? Your complex form with arguments may have some issues, this form...
  • P
    phofman replied to the thread HDMI vs SPDIF.
    That response is a complete nonsense, like majority of AI-produced content. IME AI is a very bad advisor in technical issues, it...
    • 1724608710201.png
  • P
    phofman replied to the thread HDMI vs SPDIF.
    REW does not care what device it accesses. Both HDMI and SPDIF are just regular alsa devices. It's just what device you choose, how you...
  • P
    phofman replied to the thread HDMI vs SPDIF.
    Just a note - did I understand correctly that you had a native SPDIF output available? If so, then the HDMI->SPDIF converter would be...
  • P
    phofman replied to the thread HDMI vs SPDIF.
    Those surroundX.Y PCM devices are just hints, offered for HDMI config by the alsa config layer...
  • P
    phofman replied to the thread HDMI vs SPDIF.
    Well, spdif is a two-channel interface, why should the HDMI alsa card offer 6 channels? IIUC the SPDIF converter reports EDID with two...
  • P
    phofman replied to the thread HDMI vs SPDIF.
    My original understanding was that you were looking for a PCM-multichannel REW output through non-audio SPDIF. Now it looks like you are...
  • P
    phofman replied to the thread HDMI vs SPDIF.
    Well then don't use DEV=1 but DEV=0 if that's what works. I do not know where DEV=1 (or hw:1,1) arose in your tests. I would suggest...
  • P
    phofman replied to the thread HDMI vs SPDIF.
    While looking at your mplayer output - alsa-lib complains about "Unknown PCM hw:1,1,AES0=6". The reason for the complaint is that your...
  • P
    phofman replied to the thread HDMI vs SPDIF.
    So the device hw:1,1 seems to be correct SPDIF output. Then you may try using device "iec958:CARD=Generic,DEV=1" instead of "hw:1,1"...
  • P
    phofman replied to the thread HDMI vs SPDIF.
    When no alsa device is specified (you only enabled alsa audio output module) , mplayer uses device "default" which in your config is...
Top Bottom