Sonnie Parker's latest activity
-
Perfect, I was wondering if the miniDSP would work as the low pass filter. I’m only using two of the outputs on my miniDSP, so I’ve got... -
Sonnie Parker replied to the thread Bass Shakers on the cheap!.Yep... that will work perfectly. Do you use Dirac on your subs then run AccuEQ afterwards? Or did you not get the Dirac option?
-
Sonnie Parker replied to the thread Bass Shakers on the cheap!.Are you using all the outputs on the miniDSP? You could use one of those outputs to the Sony and use the low pass filter in the DSP...
-
Sonnie Parker replied to the thread Bass Shakers on the cheap!.I see... you are using the RCA filter between the Onkyo and the Sony. The Sony only sees 50Hz and below. :T
-
Sonnie Parker replied to the thread Bass Shakers on the cheap!.You'll have to use the Front speaker outputs. IIRC, that unit doesn't have a low-pass crossover on the mains, so you'll need the filters...
-
Sonnie Parker replied to the thread Bass Shakers on the cheap!.Okay... if this is bottom of the chair (borrowed photo from elsewhere) ... is this considered facing up once the chair is lowered back...
-
-
Sonnie Parker replied to the thread Bass Shakers on the cheap!.Well cool beans on top of carrots... I see it now. :woohoo:
-
Sonnie Parker replied to the thread Bass Shakers on the cheap!.I did not know this. Is it an intentional feature, or just doable? Seems like ART would pick it up as a support channel.
-
Sonnie Parker reacted to HIDAC's post in the thread How many subwoofers are you using in your main system or home theater? with
Like.
I have built two subs using BMS 12S 330 12in drivers 600W. Each box is tuned to 32Hz in a reflex enclosure. The subs are driven by Hypex... -
Sonnie Parker replied to the thread Bass Shakers on the cheap!.Ehhh... I don't think that amp would work in my case. I can't use that output on the MK3 because it would have to go through ART...
-
Sonnie Parker replied to the thread Bass Shakers on the cheap!.Hmmm... I really like this kit here that includes two shakers, a small amp, and a remote volume control. This would be super easy to set...
-
-
Sonnie Parker replied to the thread Bass Shakers on the cheap!.I believe Todd will confirm that two per seating location is ideal. I have one free output on my StormAudio MK3 that I may use to power...
-
Sonnie Parker replied to the thread Bass Shakers on the cheap!.You might also consider this amp at Amazon for only $109. With the 48v power supply, it was measured at 144 watts per channel over at...
-
I suggested that @Mike Schramm consider adding bass shakers to his room. Here's an old post from another forum, where I describe how...
-
Sonnie Parker replied to the thread 24-25 NFL.That Washington game was a fun one to watch... glad they were able to pull it out at the end. I know there's at least one happy dude...
