Hi,
So I was generating EQ for a subwoofer and I've exported the fitler text and loaded on a MTRX Studio. I also created a filter measurement from the filters. I'm finding that the MTRX Studio's drawing of it's EQ with the loaded filter settings do not match the REW filter measurement shape or gains. I've started trying to figure out what's going on so I set up a simpler case in REW.
I've imported a flat curve. I've created two filters at 100 Hz with Q=10 with eith gain=+12 and the other with gain=-12. In my thinking they should have the same Q but opposite polarity and cancel each other. But drawn Q's are different. Am I confused or is this a problem?
So I was generating EQ for a subwoofer and I've exported the fitler text and loaded on a MTRX Studio. I also created a filter measurement from the filters. I'm finding that the MTRX Studio's drawing of it's EQ with the loaded filter settings do not match the REW filter measurement shape or gains. I've started trying to figure out what's going on so I set up a simpler case in REW.
I've imported a flat curve. I've created two filters at 100 Hz with Q=10 with eith gain=+12 and the other with gain=-12. In my thinking they should have the same Q but opposite polarity and cancel each other. But drawn Q's are different. Am I confused or is this a problem?