rthorntn
Registered
Thread Starter
- Joined
- Oct 1, 2024
- Messages
- 1
More
- Preamp, Processor or Receiver
- MiniDSP SHD
- Main Amp
- Valvet A1r
- DAC
- MiniDSP SHD
- Music Server
- Roon
- Front Speakers
- Salk Songtower RT
- Subwoofers
- SVS 3000 Micro
Hi,
So I'm building speakers, they'll basically have 4-way digital DSP crossovers (CamillaDSP, RPi5, DAC8X and eight amps).
The CamillaDSP RPi5 will be setup with USB gadget mode.
USB gadget should allow a Windows PC connected to the RPi5 USB-C to see the RPi5 as a 2-ch sound card. I assume this exposes a 2-ch input to Linux that gets mapped as inputs into CDSP.
So to my question does Audiolense XO just see stereo outputs and its configured by me with the crossover frequencies set on the DSP or does it need access to all 8-ch to do its XO magic?
Thanks.
So I'm building speakers, they'll basically have 4-way digital DSP crossovers (CamillaDSP, RPi5, DAC8X and eight amps).
The CamillaDSP RPi5 will be setup with USB gadget mode.
USB gadget should allow a Windows PC connected to the RPi5 USB-C to see the RPi5 as a 2-ch sound card. I assume this exposes a 2-ch input to Linux that gets mapped as inputs into CDSP.
So to my question does Audiolense XO just see stereo outputs and its configured by me with the crossover frequencies set on the DSP or does it need access to all 8-ch to do its XO magic?
Thanks.
Last edited:
