FIBBR to Debut All-New Pure2 Fiber Optic HDMI Cable at CEDIA 2019

Todd Anderson

Editor / Senior Admin
Staff member
Thread Starter
Joined
Jan 20, 2017
Posts
9,813
Location
Balt/Wash Metro
More  
Preamp, Processor or Receiver
StormAudio ISP.24 MK2
Main Amp
Emotiva XPA-5
Additional Amp
Emotiva XPA Gen3 2.8 multichannel amp
Other Amp
Denon X8500H
DAC
THX ONYX
Computer Audio
AudioEngine A2+
Universal / Blu-ray / CD Player
Kaleidescape TERRA, OPPO UDP-203, Panasonic UB9000
Streaming Equipment
iFi Audio Zen Blue
Streaming Subscriptions
Spotify
Front Speakers
GoldenEar Technology Triton One.R
Center Channel Speaker
GoldenEar Technology SuperCenter Reference
Surround Speakers
GoldenEar Invisa MPX
Surround Back Speakers
GoldenEar Invisa MPX
Front Height Speakers
SVS Prime Elevation x4 (Top Front, Top Mid-Front)
Rear Height Speakers
SVS Prime Elevation x4 (Top Middle, Top Rear)
Subwoofers
Quad Array SVS SB16s
Other Speakers
Behringer 1124p; Aura Bass Shaker Pros; SuperSub X
Screen
Seymour Screen Excellence, Enlightor NEO AT Screen
Video Display Device
JVC NZ8
Other Equipment
Sony 65-inch A95L OLED, Sony 65-inch X900F, ZeroSurge 8R15W x 2, ZeroSurge 2R15W x 2
full?d=1567695279.png
(September 5, 2019) Quality HDMI cable manufacturer, FIBBR, is poised to unleash its latest fiber optic creation at CEDIA 2019 in Denver, Colorado. Called Pure2, the cable delivers long-run access to a 24Gbps bandwidth with support for 12-bit color, 4K resolution, 60Hz frame rate, 4:4:4 color, and audio return channel. Additionally, the cable carries a power-booster option using a USB pigtail. When a connected device requires additional energy to properly power Pure2’s optical engine, the flexible USB pigtail can be attached to an adjacent USB port. And to accommodate tricky installations, the cable can be bent up to 180 degrees without signal failure.

According to FIBBR, its proprietary TransFuture technology allows for Data Display Channel and Hot Plug Detection signals across a single copper wire. Additionally, dual onboard microcontrollers can be updated with new firmware to meet future operational requirements.

FIBBR is showcasing Pure2, along with its full line of products, in Booth #2934 at CEDIA 2019. For more information, visit fibbrtech.com.
 
Top Bottom