Highs going up?

[kek181]

Hey folks after months of hardwork my HT is done and looks great. I dove into REW and checking the quality of sound, and notice that my highs (10k and above) actually tick back up a bit, nothing crazy but would love to hear if anyone has any thoughts. My room is 13 by 19.....treatments are OC703/705 mix of diffusion and absorption. I have 2 18 UM in the front powered by a NX6000. I have a 7.4 set up with HTM12s, and Volts powered by a Denon 6500. I ran audysses and have a flat setting. Would love to hear some feedback

 

[kek181]

Hey folks after months of hardwork my HT is done and looks great. I dove into REW and checking the quality of sound, and notice that my highs (10k and above) actually tick back up a bit, nothing crazy but would love to hear if anyone has any thoughts. My room is 13 by 19.....treatments are OC703/705 mix of diffusion and absorption. I have 2 18 UM in the front powered by a NX6000. I have a 7.4 set up with HTM12s, and Volts powered by a Denon 6500. I ran audysses and have a flat setting. Would love to hear some feedback

 

[John Mulcahy]

You have loaded your mic cal file twice, once as a mic cal and again as a soundcard cal. Remove it from the soundcard cal.

Is that a listening position measurement? The bass is set very high, more than 20 dB above the mid range. There is an odd peak around 700 Hz. The measurement looks to be with both left and right speakers running, best measuring each separately.