Rengozu
Registered
Thread Starter
- Joined
- May 6, 2020
- Posts
- 1
More
- Preamp, Processor or Receiver
- Marantz 8802a
- Main Amp
- Marantz MM8077
- Additional Amp
- Marantz MM7055
- Other Amp
- Crowson D-501
- Universal / Blu-ray / CD Player
- Panasonic UB9000 UHD player
- Front Speakers
- Atlantic Technology IW-30LCR
- Center Channel Speaker
- Atlantic Technology IW-30LCR
- Surround Speakers
- Atlantic Technology IW-155 SR
- Surround Back Speakers
- Atlantic Technology IW-155 SR
- Front Height Speakers
- Atlantic Technology IC-6 OBA
- Rear Height Speakers
- Atlantic Technology IC-6 OBA
- Subwoofers
- SVS PB-16 Ultra
- Other Speakers
- Crowson Shadow Actuators
- Screen
- Seymour Center Stage XD AT
- Video Display Device
- JVC RS:600 projector
- Remote Control
- Logitech Harmony
Hello everyone, obviously I'm new here, though I've lurked around here and AVS and read over countless threads and videos over the last month. And while I love the thought of making my setup better, so many of the tutorials on how to get there may as well be written in another language. Same with the measurement charts of what I'm looking at. I want to get there, but hoping someone would be willing to assist with what I needed to do and give insight on what I should change based on what I could show them.
My main goal is to make my sub sound better and line up the timing/phase with my Crowson motion actuators. Would also love hearing the ideal settings people like to use to get the most out of the actuators. In my head that part should be as easy as plug and play.
My other speakers (7 surround, 4 atmos) had already been calibrated for my room by a pro, so I guess I'm hesitant with tinkering too much on my own as to not mess up what I've already got going.
I'm on a 2015 Mac with the HDMI ports etc so that makes hookup easy. I have the miniDSP 2x4 HD with DG wifi hub and the UMIK-1 mic, and have followed all the guides in getting everything initially setup. Even skipped ahead a little and saved a house curve (practically empty) and made it work with BEQdesigner where it automatically adds it to the BEQ files when sending over to the miniDSP. Played around with several BEQ added titles I had and was already impressed at the improvement it made for some of the lackluster Disney releases.
So I think I've got that part of the puzzle figured out, just need help filling in the technical blanks to get a better optimized house curve to use with this. Thanks!
My main goal is to make my sub sound better and line up the timing/phase with my Crowson motion actuators. Would also love hearing the ideal settings people like to use to get the most out of the actuators. In my head that part should be as easy as plug and play.
My other speakers (7 surround, 4 atmos) had already been calibrated for my room by a pro, so I guess I'm hesitant with tinkering too much on my own as to not mess up what I've already got going.
I'm on a 2015 Mac with the HDMI ports etc so that makes hookup easy. I have the miniDSP 2x4 HD with DG wifi hub and the UMIK-1 mic, and have followed all the guides in getting everything initially setup. Even skipped ahead a little and saved a house curve (practically empty) and made it work with BEQdesigner where it automatically adds it to the BEQ files when sending over to the miniDSP. Played around with several BEQ added titles I had and was already impressed at the improvement it made for some of the lackluster Disney releases.
So I think I've got that part of the puzzle figured out, just need help filling in the technical blanks to get a better optimized house curve to use with this. Thanks!
