Lower Limit on the "Q" of PEQ

[Chuck Gerlach]

Maybe there is a setting to adjust this, but I would like to be able to use a "Q" of less than 1. Is that a possibility? My attempts using the search command were fruitless.

Thanks

 

[John Mulcahy]

The Q range depends on the equaliser selection, the Generic equaliser allows Q values down to 0.1. Target match doesn't use Q values below 1.0, such broad filters are more suitable for tonal adjustments than targeting any particular feature of the response.

 

[Chuck Gerlach]

The Q range depends on the equaliser selection, the Generic equaliser allows Q values down to 0.1. Target match doesn't use Q values below 1.0, such broad filters are more suitable for tonal adjustments than targeting any particular feature of the response.

Thanks.

Which is exactly why/how I want to use them. I'm coming from OmniMic and when it calculates filters, it uses values south of 1. My specific need is to use one (or maybe two) PEQs to fill in a very wide "dip" and to provide some slope to the response in that specific range.

So I would need to create that PEQ manually or is there some more automated way to have REW calculate it for me?

 

[John Mulcahy]

Yes, you need to manually apply such filters.