Measuring Studio Monitors with Subwoofer

[mjaya915]

Hello! Looking for help! As I'm very very new to this subject.

I recently added a subwoofer to my home studio and purchased a miniDSP 2x4 Balanced with the measuring mic

I got these doubts when i started measuring

Should i measured Subwoofer and the full range speakers seperarely or with the sub

If i do measure with the sub, while adding the files to minidsp software, should i add them after crossover or before

How do i define the crossover point. Subwoofer has 60, 80, 90 and 100hz and should i apply the same crossover points in all places where ever applicable

When i apply EQ and crossover, should it be 48oct/db or 24

Thank you for helping

 

[DanDan]

I regard REW as 'An Acoustic Lab' All of your answers can be found by testing. There are many guides to combining a sub, but I would 'philosophically' lean towards adding the sub to full range speakers running full range. What speakers and sub have you got?

 

[mjaya915]

Hi. I got all KRK 5" top and 8"sub