polish_power
Registered
Thread Starter
- Joined
- Jul 31, 2024
- Posts
- 2
More
- Preamp, Processor or Receiver
- evo4
- Main Amp
- powersoft
- Additional Amp
- labgruppen
- Other Amp
- d80
- DAC
- evo4
- Computer Audio
- evo4
- Universal / Blu-ray / CD Player
- none
- Front Speakers
- d&b, l'acoustics, nexo, outline
- Front Wide Speakers
- d&b, l'acoustics, nexo, outline
- Center Channel Speaker
- d&b, l'acoustics, nexo, outline
- Surround Speakers
- d&b, l'acoustics, nexo, outline
- Surround Back Speakers
- d&b, l'acoustics, nexo, outline
- Front Height Speakers
- d&b, l'acoustics, nexo, outline
- Middle Height Speakers
- d&b, l'acoustics, nexo, outline
- Rear Height Speakers
- d&b, l'acoustics, nexo, outline
- Subwoofers
- d&b, l'acoustics, nexo, outline
Dear John,
i have noticed that You've added d&b audiotechnik filterset for export in the EQ window.
That made me wonder if similar implementation is possible for filter sections used by the industry leading amplified controller manufacturer - Powersoft.
In the Powersoft X8 amp (which i am most familiar with) there are three eq sections to work with:
input/grp EQ - up to 256 raised cosine filters
Speaker EQ - 8 IIR filters (any type) and two crossovers
And finally- output EQ - 16 IIR filters crossovers including predefined FIR highpass
Every of theese blocks has import/export feature. I attach also exported files from Armonia+ control software.
This full featured DSP serves not only for tuning complete systems like with the d&b filter set, but also for creating speaker presets from scratch. I think that adding this feature to REW would be awesome.
If REW would generate files compatible with the import feature of armonia+ it would be even more awesome.
Please tell me what You think about it.
Waiting forward to reading from You.
Magic.
i have noticed that You've added d&b audiotechnik filterset for export in the EQ window.
That made me wonder if similar implementation is possible for filter sections used by the industry leading amplified controller manufacturer - Powersoft.
In the Powersoft X8 amp (which i am most familiar with) there are three eq sections to work with:
input/grp EQ - up to 256 raised cosine filters
Speaker EQ - 8 IIR filters (any type) and two crossovers
And finally- output EQ - 16 IIR filters crossovers including predefined FIR highpass
Every of theese blocks has import/export feature. I attach also exported files from Armonia+ control software.
This full featured DSP serves not only for tuning complete systems like with the d&b filter set, but also for creating speaker presets from scratch. I think that adding this feature to REW would be awesome.
If REW would generate files compatible with the import feature of armonia+ it would be even more awesome.
Please tell me what You think about it.
Waiting forward to reading from You.
Magic.