Trouble with 2.1 setup

fhl

New Member
Thread Starter
Joined
May 27, 2023
Posts
5
More  
Main Amp
NuPrime ST-10
Additional Amp
Lab C48:4
Computer Audio
RME Babyface/Audiolense
Front Speakers
Danley SH50
Subwoofers
DIY BMS 18N862
I've used AL some years ago, but never in a .1 setup, only multiway stereo. Now I'm struggling with a 2.1 setup. When I test speaker connection, the tapping sound for the subwoofer comes from the left speaker. I also have a new soudcard(RME Babyface), so the problem might be related to that. I've attached som screen dumps, can anyone see any problems with my setup?

Frode


Crossover.png
Playback.png
Speaker setup.png
Totalmix.png
 
One step closer, now I have the test signal for the sub in both sub and left speaker.

Frode
 
Can you show how the measurement window looks like? do you use the physical outs or digital/midi?
 
Can you show how the measurement window looks like? do you use the physical outs or digital/midi?

Here's the measurement window.

Frode


Measurement.png
 
When you tap the check speakers bottom does "output channel 0" show channel 1 in the Patchmix DSP? I don't see 3 physical outs in your pathcmix. Did you use this RME with AL before? There is a way to split the two AS 1/2 to two channels AS1 AS2. I have a different RME and this is how it looks.
 

Attachments

  • convolver working on PC playback.jpg
    convolver working on PC playback.jpg
    218.2 KB · Views: 22
Not quite sure what happened, but now it's working. Pulled down the marked fader and it worked. Now the fader is up again, but it still works. Time to do some measurements!

Frode


Totalmix2.png
 
Hi, do you use your setup for video streaming from the PC? how does it work for you?
 
Hi, do you use your setup for video streaming from the PC? how does it work for you?
No, I've only tried music so far.
 
Back
Top