TJohnston
Registered
Thread Starter
- Joined
- Aug 16, 2022
- Posts
- 1
More
- Main Amp
- Bias Q5
- Subwoofers
- Void Stasys XAir's
Hello,
I've just started using and learning REW, my goal is to make our club room sound better.
Currently one of the things I am trying to do is look at the phase relationship between my subs and tops, and I have watched many videos explaining the process. Most of these videos show a phase response that starts at the top left and will hit the bottom right and then wrap around. Ive tried quite a few measurements on my 2 current subs and am getting this strange phase response as pictured.
Is this something normal, or what could be causing this issue? Can provide any info needed
Subs - Void Stasys Xairs
Mic - Sonarworks Xref20
Audio interface - scarlette 2i2 first gen
Mic is hooked into input 1, output 1 - 2 run out of the interface into the amp.
phantom power is on, inputs set to line, i also followed the setup calibration videos and loaded in the 0 degree mic cali which is how i had the mic oriented.
I've just started using and learning REW, my goal is to make our club room sound better.
Currently one of the things I am trying to do is look at the phase relationship between my subs and tops, and I have watched many videos explaining the process. Most of these videos show a phase response that starts at the top left and will hit the bottom right and then wrap around. Ive tried quite a few measurements on my 2 current subs and am getting this strange phase response as pictured.
Is this something normal, or what could be causing this issue? Can provide any info needed
Subs - Void Stasys Xairs
Mic - Sonarworks Xref20
Audio interface - scarlette 2i2 first gen
Mic is hooked into input 1, output 1 - 2 run out of the interface into the amp.
phantom power is on, inputs set to line, i also followed the setup calibration videos and loaded in the 0 degree mic cali which is how i had the mic oriented.
