Guilherme66
Member
Thread Starter
- Joined
- Feb 22, 2025
- Posts
- 35
The beast has arrived...
Impressed with the finish and construction of the A10H.
I already had two updates. I did the Audyssey calibration and so far very excited with the audio. Very clean and detailed sound.
The power is sensational passing a lot of control and speed in the boxes, but with the impedance in 8 ohms it heated up the Denon A LOT. My boxes are 4 ohms.
I changed it to 4 ohms and the temperature dropped drastically. After hours on with medium volume it only gets warm.
I didn't notice power loss in 4 ohms and the ECO mode is turned off automatically. For now I'll leave it this way.
So far I'm enjoying A10H A LOT. Definitive integrated.
Impressed with the finish and construction of the A10H.
I already had two updates. I did the Audyssey calibration and so far very excited with the audio. Very clean and detailed sound.
The power is sensational passing a lot of control and speed in the boxes, but with the impedance in 8 ohms it heated up the Denon A LOT. My boxes are 4 ohms.
I changed it to 4 ohms and the temperature dropped drastically. After hours on with medium volume it only gets warm.
I didn't notice power loss in 4 ohms and the ECO mode is turned off automatically. For now I'll leave it this way.
So far I'm enjoying A10H A LOT. Definitive integrated.
Attachments
-
IMG_8263.jpeg741.4 KB · Views: 19
-
IMG_8268.jpeg577.1 KB · Views: 18
-
IMG_8271.jpeg546.3 KB · Views: 13
-
IMG_8277.jpeg433.5 KB · Views: 12
-
IMG_8292.jpeg541.7 KB · Views: 11
-
IMG_8289.jpeg737.9 KB · Views: 11
-
IMG_8313.jpeg878.8 KB · Views: 13
-
IMG_8315.jpeg410.5 KB · Views: 22
-
c16a052f-3c8d-414a-8171-bfd2e3bed02e.jpeg236.2 KB · Views: 28
-
4496a56f-976a-4db9-8b3a-3e86ec1c13df.jpeg128.2 KB · Views: 26
-
IMG_8368.jpeg423.1 KB · Views: 28
-
IMG_8370.jpeg400.9 KB · Views: 20