DVS input issue

[Alanharrison]

Hi

I'm having an issue using Dante Virtual Soundcard as an interface.

Output works fine, however inputs do not register level. Patch appears to be correct, and smaart sees the mic and loopback signals fine.

Any help appreciated.

Alan

 

[John Mulcahy]

Are you on Windows or macOS? If on Windows are you using Java drivers or ASIO? Java drivers on Windows only support stereo input, ASIO should be able to see all available channels.

I have seen a post from someone using the Dante Virtual Soundcard on a mac, that seemed to work OK.

 

[Alanharrison]

Are you on Windows or macOS? If on Windows are you using Java drivers or ASIO? Java drivers on Windows only support stereo input, ASIO should be able to see all available channels.

I have seen a post from someone using the Dante Virtual Soundcard on a mac, that seemed to work OK.

Hi John, it's on Mac Mojave 10.14.2

Its a very strange one yeah, especially as smaart is seeing them

 

[John Mulcahy]

Worth checking Audio Midi Setup to see what format is assigned for the Dante inputs.

 

[Alanharrison]

Hmm seems normal, set up for the correct 16ch 96k mode.

 

[John Mulcahy]

Could use the "Generate debug file" button on the REW soundcard preferences and attach the file here, might give some clues.

 

[Alanharrison]

here you go

 

[John Mulcahy]

Try selecting the Dante Virtual Soundcard input rather than leaving it as Default Input, default typically only offers stereo.

 

[Alanharrison]

Hi, I've tried that, still no joy. As you can see there's no action on the mic or loopback

 

[John Mulcahy]

You need to use the V5. 20 beta versions with 10.14 or 10.15, to cope with the changes in mic access permissions.

 

[Alanharrison]

Aha. Shall try that thanks