Feature request: ‚Average the responses‘ also for Distortion and RT60

[pklose]

Dear John,

could you please add an option to make it possible to „Average the responses“ also for distortion and RT60 measurements. Much appreciated!

thanks

 

[John Mulcahy]

Averaging RT60 results is on the todo list, I can add averaging of distortion data. Both are made somewhat complicated by their being linked to a measurement having an impulse response, whilst a response average doesn't, so there would be some changes needed to accommodate the presence of RT60 and/or distortion data without having an IR.

 

[pklose]

Looking forward to it!

 

[pklose]

Nice

 

[David Eisan]

I can add averaging of distortion data.

Did this happen?

 

[John Mulcahy]

Averaging of distortion data has been available since the 5.20.1 release:

• When measurements with distortion data are averaged using (A+B)/2 or Vector average their distortion data is also averaged, providing the measurements were made at the same sample rate and with the same sweep or stepped sine settings

 

[pklose]

That is a very hidden but nice feature.