Feature Request - auto-updating impulse response plots on Overlays screen

[AudiocRaver]

John,

We all know how convenient it is to view the RTA screen while running pink noise and making an adjustment to speaker position or angle, the convenience in having a display update while you make a physical change and watch for the result. It would be great to have a view of two impulse response plots, on the Overlays panel, and have it update the same way after adjusting a speaker or acoustical panel.

It might work something like this:

• trigger from the Overlays panel
• user waits for selected delay
• warning beep tells you a sweep is about to begin
• Left sweep
• Right sweep
• result of REW analysis displays on Overlays panel on computer screen
• user waits for selected delay
• ...
• ...
• ...

There might even be two modes, a "repeating" mode, or a ""run the sequence once per trigger" mode.

Is that a feature worth implementing in some form?

 

[John Mulcahy]

I have a set of features on the list around live extraction and update of the impulse response, in the manner of 2-channel FFT systems like Smaart. It will be some time before I get to them though.

 

[AudiocRaver]

Good to hear it, thanks John.