galaxyluv
Registered
Thread Starter
- Joined
- Sep 10, 2019
- Posts
- 1
More
- Preamp, Processor or Receiver
- Trinnov Altitude 32 Processor
- Main Amp
- Bryston 6BSST
- Additional Amp
- Bryston 9BSST and Parasound A51
- Universal / Blu-ray / CD Player
- Pioneer Bluray UDP-LX500
- Front Speakers
- B&W 802 D3
- Center Channel Speaker
- B&W HTM-1 D3
- Surround Speakers
- B&W CWM 7.3
- Surround Back Speakers
- B&W CWM 7.3
- Front Height Speakers
- B&W CCM Cinema 7
- Rear Height Speakers
- B&W CCM Cinema 7
- Subwoofers
- Svs PB16 Ultra x 3Nos.
- Video Display Device
- Sony 65" OLED TV
- Remote Control
- URC Total Control 2.0
Hi,
I am a novice. I have recently purchased the Fireface UC sound card and would like to calibrate it using REW 5.19
Could some one guide me the steps necessary from making connections to adjustments in the software i.e. REW and TotalMix FX.
I tried putting one end of the balanced cable into the MIC IN (Input 1, Balanced-XLR) and the other end of the cable in OUTPUT 1 (Balanced-TRS) but after pressing the calibrate button on REW nothing happens.
I am a novice. I have recently purchased the Fireface UC sound card and would like to calibrate it using REW 5.19
Could some one guide me the steps necessary from making connections to adjustments in the software i.e. REW and TotalMix FX.
I tried putting one end of the balanced cable into the MIC IN (Input 1, Balanced-XLR) and the other end of the cable in OUTPUT 1 (Balanced-TRS) but after pressing the calibrate button on REW nothing happens.
