Generator, Meas. Sweep: would it be possible to get a step-by-step?

[Laszlo Lebrun]

Hi,

did I understand it right, that the Meas. Sweep option of the generator is providing a sweep compensated according to the "soundcard" calibration file, so that the complete loop should be linear?
If it is compensated according to the calibration file, I would really love to be able to sweep manually by octaves / 1/3rd octaves.
Maybe start at 1 KHz and get << , < , o , > , >> buttons to step the frequency up/down?
Generally, the above-mentioned buttons to step the frequency could be useful also in SineWave and Square Wave, isn't it?

Do you think it would be a huge issue to provide that? That would be absolutely gorgeous!

Did I also understand it right, that the linear sweep and the log sweep are not taking the calibration file into account?

Thank for considering
Regards from Germany
Laszlo

 

[John Mulcahy]

The calibration files are only used when generating frequency responses from measurement results.

 

[Laszlo Lebrun]

The calibration files are only used when generating frequency responses from measurement results.

Thank you for the very fast reply.
I hoped to get that way an actuator linearized generator...