natebot88
New Member
Thread Starter
- Joined
- Sep 17, 2020
- Posts
- 9
More
- Preamp, Processor or Receiver
- Denon AVR-S750H
- Front Speakers
- Polk Monitor 5b
- Surround Speakers
- Realistic Minimus 7
- Subwoofers
- JBL PSW-1000
Running REW 5.20.4 on a 2021 M1 MacBook Pro, Monterey 12.1
I have confirmed my AVR (Denon AVR-S750H) is receiving multichannel input via HDMI because playing Dolby Digital test files successfully isolates the LFE channel. The AVR display also shows "Multi In".
When running a measurement in REW with LFE selected as the output, REW simply outputs a normal, full-spectrum sweep through sub+mains, which does include the Sub until it passes the crossover point. It's like it's running a regular stereo sweep with one of the mains selected as the output.
MIDI output is set to 6ch, 24 bit, 48 kHz. Confirmed that is compatible with my AVR.
SoundScape SoundSource running / not running does not affect anything.
Trying "Check Levels" from the Preferences page simply outputs nothing with either setting (to subwoofer or mains).
Note: I usually use a UMIK-1, just testing outputs here.
Not sure what else to try... and hopefully I'm posting this in the right place
I have confirmed my AVR (Denon AVR-S750H) is receiving multichannel input via HDMI because playing Dolby Digital test files successfully isolates the LFE channel. The AVR display also shows "Multi In".
When running a measurement in REW with LFE selected as the output, REW simply outputs a normal, full-spectrum sweep through sub+mains, which does include the Sub until it passes the crossover point. It's like it's running a regular stereo sweep with one of the mains selected as the output.
MIDI output is set to 6ch, 24 bit, 48 kHz. Confirmed that is compatible with my AVR.
Trying "Check Levels" from the Preferences page simply outputs nothing with either setting (to subwoofer or mains).
Note: I usually use a UMIK-1, just testing outputs here.
Not sure what else to try... and hopefully I'm posting this in the right place

Last edited: