No Soundcard Input Data

[dnauber]

I am a new user and could not find information on my problem elsewhere so am hoping someone can help me with this. I am using a Dayton Audio UMM-6 and a MacOS Mojave 10.14.6. I have Audio Midi set up to use the UMM-6 and in REW Preferences have selected the UMM-6 as the Input Device and Microphone as the Device. Under Security & Privacy REW is enabled. Any time I try to take a measurement I get a message that says No Soundcard Input Data, "The soundcard did not provide any inout data. Please check that it is connected." The UMM-6 is plugged in and blue light on. Am I missing something or can someone offer a suggestion? Thanks.

 

[John Mulcahy]

You need to use the V5.20 beta versions, they have been adapted to cope with the mic access permission feature that came in with Mojave.

 

[dnauber]

Thanks, I'll give that a try. When I tried to download the beta version yesterday the button said I did not have permission. Maybe that was before I registered though, I don't recall.

 

[dnauber]

All works well now. Many thanks for your help!

 

[altr]

I have a similar set up, but I use a Scarlett Solo interface with ADAM AX3 monitors. I get a Ref IN but the IN is very low -97 dBFS... The solution is probably obvious but I can't find it.Thanks!

 

[John Mulcahy]

If you are seeing the mic signal on the ref channel you probably need to swap the input channel in the REW soundcard preferences.

 

[altr]

Got it! Thanks a lot John!