REW: miniDSP as output device?

[Haiko61]

Hi,
I am running REW 5.19 B7 on a Laptop (Windows XP) and both
miniDSP 2x4 HD + UMIK-1 are connected at once when measuring.
What I wonder, is that I can select "miniDSP 2x4HD" as Output Device ?!
This would be a nice option instead of analog soundcard, but nothing happens.

Is that just a problem of OS device lists or is it be possible to feed the generator signal
directly thru miniDSP?

Thanks

 

[John Mulcahy]

Yes, USB can be used to send audio to the 2x4 HD, and get processed audio back. From the manual:

3.2.3 USB
Connect the USB (Type B mini) port of the miniDSP 2x4 HD to a free USB 2.0 port on your computer using the supplied cable. The USB is used for:

• Configuration and real-time control of the miniDSP 2x4 HD,
• Streaming audio from a computer or other device such as a music streamer, at up to 192 kHz, and
• Streaming the processed audio (four output channels) from the miniDSP 2x4 HD to the computer.

 

[Haiko61]

the input selection on the miniDSP must be set to USB of course, than it's working fine!
I had not in mind this setting:

Thank You