setup input

[pscm]

Just getting into learning how to take readings, interpret and address things in my listening area. Once I know I am on the right track I plan on doing a bit of a novel to seek input. In the mean time I have taken some initial measurements and was hoping for any input on if folks see something way out. I specifically ask as my frequency scale doesn't have the sharp climb at the beginning at lower frequencies (start of mic responses) that I have been seeing doing research. Didn't know if this was from the length of time i ran the measurement or what. (See attached). I realize I need to take several readings but looking to make sure I am on the right track before going there. Off of this it appears I will be dealing with a problem somewhere in the 50-55 Hz range

Thanks in advance for any input.

 

[jschwender]

Hard to comment, i don't even know what the measuring object is. Is that a room measurement or a speaker measurement or something else?