rew

Hi John, I am using a "generic EQ" (actually Apple's AUNBandEQ) to set up my system - unfortunately, it wants the Q factor translated into the octave bandwidth factor BW before you enter the filter data. REW's Generic EQ of course calculates the standard Q values. It's easy enough to...

Hello, Ι am so happy with new firmware update and new cal file, for Umik-2. But, I'm in confusion, I have make meassurments with umik-2, with REW v5.19 and REW v5.20 RC4, and I make two differents Results. which result is real? Baxevanis Kostas Sound engineer

hi guys. i will be embarking on installing audio gear in my car in a few weeks. i have purchased a minidsp c-6x8, and have a base config w/ routing and x-overs configured. i was wondering if we have "tuners" that would help do corrections w/ rew once i have everything installed. i've read and...

Hello Everyone, I calibrated my sound card but the high end looks odd. Why wouldn’t it be a flat line? As you can see it’s affecting the room measurements in the opposite way. Plus phasing look weird.

Hi All, REW won’t see the mic input from my audio interface, and I was wondering if anyone had any suggestions. Mac OS 10.14.6 REW v5.20 Beta 59 (latest) Sonarworks XREF20 mic RME Fireface UCX v3.39 (latest) REW output set to Fireface Input Device is set to Fireface Input is set to Fireface...

really need rew to read the soundcheck“s data。some times,the sc data freq is high to low, (the rew data freq is low to high),i think that"s why rew can not read soundcheck data

the captured only show the last measurement..

stop at 99%

How to know the speaker system is hifi? Limit will help you judge. Limit can be added, for example (frequency response, thd, impedance). Limit tool will help you to make limit with measurement results。 In the graphic display interface, it should show pass or fail.. Limit should have at least 2...

In order to manage the calibration of multiple devices more easily, I designed such a new structure. Calibration is saved as a group, each group has multiple calibrations, and calibration data of multiple devices can be added (each device can add a sensitivity and a curve). I might design a...

Maybe rew will support bk data in the future? :cool: （import the bk data to soundcheck is working）

it"s not working ;)

A digital MIC with calibration data has the enormous advantage of NOT needing an additional calibrator. (Of course the provided CAL-data has to be correct). A digital MIC like all USB-MICs may be used as a calibrated Sound Level Meter right out of the BOX (after applying the cal-data and an...

Hi! (Sorry in advance for any language mistake!) I'm quite new to whole acoustic treatment thing, but I'm trying to take it seriously. Since I'm on the budget I just watch as many valuable tutorials and figure out the best way to treat my room. Right now I bought few panels from a local...

While using REW to generate tones for sniffing out room resonances, I've noticed "birdies" from the REW generator while generating low (subsonic) frequencies. The original thread about this is on Audio Circle, and includes an explanation of "birdies" for those not familiar with this effect...

Dear John, I want to use the REW SPL Meter. For the calibration I was just wondering whether I should set my external hardware SPL-Meter to C- or A weighting. When I hit on calibrate in the REW SPL-meter, the REW SPL-meter always jumps back to C-weighting, no matter if I have set A-weighting on...

Hi There, i have recently connected a UMIK-1 mic to REW with a particular interest in the SPL module. when i am measuring sound levels of the ~90dBa range (~100-105dBC) i start getting the "Over" warning appear. i also notice that the levels meters are showing very close to 0 (i.e peaking). is...

Hi everyone, Good to find a good place to talk about calibration here. I'm very interested in headphone calibration recently. So does any one has a txt version of harman headphone target curve or a calibration file. Thanks a lot!

Hi, I'm currently looking at the RT60 data panel in REW and I noticed that occasionally there are missing values: Could anyone explain why this happens? Thanks Cameron

Hi all, I'm a mechanical engineer looking to do some acoustic analysis of a small device. I cant declare what it is that I am working on due to confidentiality, but I have a pretty solid analogy for it. Imagine a train conductors whistle, which has a cork ball in it to create that signature...