REW Beta Release REW API beta releases

John Mulcahy

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Posts
7,996
sm52 said:
I'm trying to figure out what the electrical connection should look like to do this. There is an input for a signal, there is an input for a loop from output to input. These are two inputs. Where should the inverted input signal be sent? Need a third input?
Click to expand...
No, it goes to either of the two inputs.
 
B

Breeman

Member
Joined
Jan 9, 2019
Posts
184
When trying to change the colour scheme settings of a waterfall graph from within EQ shows a greyed out windows. See below;
Snap9.png
 
John Mulcahy

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Posts
7,996
The waterfall colour scheme is forced to None if waterfall live update is selected as the colour scheme options slow down redraw substantially.
 
S

sm52

Member
Joined
Mar 14, 2019
Posts
1,004
John Mulcahy said:
No, it goes to either of the two inputs.
Click to expand...
This is good. A non-inverted measurement signal is supplied to one input, I feed the second input through an input signal splitter and connect the wires in reverse (plus to minus, minus to plus) to the second input. I enable the Invert correlation reference option. This is right? A loop connection from output to input is not used.
 
serko70

serko70

Member
Joined
Oct 13, 2017
Posts
286
Location
Germany
More  
Preamp, Processor or Receiver
Marantz SR6015
Main Amp
Rotel Michi X3
DAC
Oppo 205
Computer Audio
Intel NUC
Universal / Blu-ray / CD Player
Oppo 205
Streaming Subscriptions
TIDAL, ROON
Front Speakers
Focal Kanta 2
Center Channel Speaker
Linn Trikan
Surround Speakers
Focal Dome Flax
Surround Back Speakers
Focal Dome Flax
Front Height Speakers
Focal Dome Flax
Rear Height Speakers
Focal Dome Flax
Subwoofers
Focal Sub Air
Video Display Device
LG 65 3D OLED
Probable cause fetch smoothing: "None"


REW V5.40 Beta 50 running Azul Systems, Inc. JRE 1.8.0_422 64-bit on Windows 10 Locale: language en, keyboard GB, windows-1252 on 3840x1600 at 96 DPI Running in C:\Program Files\REW


Message:
java.util.concurrent.ExecutionException: java.lang.NullPointerException
Stack Trace:
java.lang.NullPointerException
java.util.concurrent.FutureTask.report(FutureTask.java:122)
java.util.concurrent.FutureTask.get(FutureTask.java:192)
javax.swing.SwingWorker.get(SwingWorker.java:602)
roomeqwizard.iM.done(y:818)
javax.swing.SwingWorker$5.run(SwingWorker.java:737)
javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.run(SwingWorker.java:832)
sun.swing.AccumulativeRunnable.run(AccumulativeRunnable.java:112)
javax.swing.SwingWorker$DoSubmitAccumulativeRunnable.actionPerformed(SwingWorker.java:842)
javax.swing.Timer.fireActionPerformed(Timer.java:313)
javax.swing.Timer$DoPostEvent.run(Timer.java:245)
java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:311)
java.awt.EventQueue.dispatchEventImpl(EventQueue.java:758)
java.awt.EventQueue.access$500(EventQueue.java:97)
java.awt.EventQueue$3.run(EventQueue.java:709)
java.awt.EventQueue$3.run(EventQueue.java:703)
java.security.AccessController.doPrivileged(Native Method)
java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(ProtectionDomain.java:74)
java.awt.EventQueue.dispatchEvent(EventQueue.java:728)
java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:205)
java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:116)
java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:105)
java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:101)
java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)
java.awt.EventDispatchThread.run(EventDispatchThread.java:82)
Caused by:
java.lang.NullPointerException
roomeqwizard.RT60.clone(y:2144)
roomeqwizard.iM$2.A(y:807)
A.A.A.A.B.A(Unknown Source)
A.A.A.A.B.A(Unknown Source)
roomeqwizard.iM.A(y:2862)
roomeqwizard.iM.doInBackground(y:2621)
javax.swing.SwingWorker$1.call(SwingWorker.java:295)
java.util.concurrent.FutureTask.run(FutureTask.java:266)
javax.swing.SwingWorker.run(SwingWorker.java:334)
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624)
java.lang.Thread.run(Thread.java:750)
 

Attachments

  • REWdiagnostic_1724011052103.zip
    56.2 KB · Views: 4
Last edited by a moderator:
J

jeppekristoffer

New Member
Joined
May 3, 2020
Posts
29
More  
Preamp, Processor or Receiver
Denon X3700H
Main Amp
Nad M27
Front Speakers
Dali Rubicon LCR
Center Channel Speaker
2-way with Purifi woofer & Gladen Aerospace 28
Surround Speakers
Dalin Fazon Sat
Front Height Speakers
Dalin Fazon Sat
Rear Height Speakers
Dalin Fazon Sat
Subwoofers
Faux sub through minidsp to front channels
Other Speakers
5 Minidsp 2x4 HD
Screen
Sony XG95 55 inch
@John Mulcahy In the latest software version im still having the problem that i cant use tab to scroll between what measurements to display. It works at first but after working a while and especially with many measurements it doesnt work anymore.
 
L

LastButNotLeast

New Member
Joined
Jun 5, 2017
Posts
7
I have noticed when using clarity overlay that unsaved measurements are unsmoothed, but measurements that have been saved and loaded are smoothed based on the setting in preferences.
Before saving:
before.jpg


After saving:
after.jpg

Michael
 
John Mulcahy

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Posts
7,996
LastButNotLeast said:
I have noticed when using clarity overlay that unsaved measurements are unsmoothed, but measurements that have been saved and loaded are smoothed based on the setting in preferences.
Click to expand...
I guess you mean group delay rather than clarity. I can't reproduce that, what is the sequence of actions that leads to an unsmoothed group delay? Do you have a default smoothing for new measurements in the Analysis preferences?
 
John Mulcahy

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Posts
7,996
jeppekristoffer said:
In the latest software version im still having the problem that i cant use tab to scroll between what measurements to display. It works at first but after working a while and especially with many measurements it doesnt work anymore.
Click to expand...
If you tab or shift tab repeatedly off either end of the graph legend you may eventually end in a component which uses tab for some function other than focus shift. Ctrl+Tab usually works to shift focus for such components, but just clicking on an entry in the legend will transfer focus back to it.
 
S

sm52

Member
Joined
Mar 14, 2019
Posts
1,004

John Mulcahy,​

Did I understand your answer correctly?
www.avnirvana.com

REW Beta Release - REW API beta releases

I'm trying to figure out what the electrical connection should look like to do this. There is an input for a signal, there is an input for a loop from output to input. These are two inputs. Where should the inverted input signal be sent? Need a third input? No, it goes to either of the two inputs.
www.avnirvana.com www.avnirvana.com
 
L

LastButNotLeast

New Member
Joined
Jun 5, 2017
Posts
7
John Mulcahy said:
I guess you mean group delay rather than clarity. I can't reproduce that, what is the sequence of actions that leads to an unsmoothed group delay? Do you have a default smoothing for new measurements in the Analysis preferences?
Click to expand...
Sorry, yes, of course, GD.
Measure, check GD. Unsmoothed. Save file. Load file. Check GD. Smoothed.
And yes, that is the smoothing that is applied to the loaded file.
Michael
 
J

jeppekristoffer

New Member
Joined
May 3, 2020
Posts
29
More  
Preamp, Processor or Receiver
Denon X3700H
Main Amp
Nad M27
Front Speakers
Dali Rubicon LCR
Center Channel Speaker
2-way with Purifi woofer & Gladen Aerospace 28
Surround Speakers
Dalin Fazon Sat
Front Height Speakers
Dalin Fazon Sat
Rear Height Speakers
Dalin Fazon Sat
Subwoofers
Faux sub through minidsp to front channels
Other Speakers
5 Minidsp 2x4 HD
Screen
Sony XG95 55 inch
John Mulcahy said:
If you tab or shift tab repeatedly off either end of the graph legend you may eventually end in a component which uses tab for some function other than focus shift. Ctrl+Tab usually works to shift focus for such components, but just clicking on an entry in the legend will transfer focus back to it.
Click to expand...
It still didnt work so I did an uninstall and a clean install, win64 and now it works. Thank you for great work.
 
John Mulcahy

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Posts
7,996
sm52 said:
This is good. A non-inverted measurement signal is supplied to one input, I feed the second input through an input signal splitter and connect the wires in reverse (plus to minus, minus to plus) to the second input. I enable the Invert correlation reference option. This is right? A loop connection from output to input is not used.
Click to expand...
Yes
 
J

JoinUs

New Member
Joined
Jan 6, 2023
Posts
85
Do you have any plans to provide a choice of UI in the future?
I've had a few updates due to some bug fixes and new looking features and then repeatedly went back to the original version.
The inclusion of most menus in mouse clicks was so hard for me to adapt.
 
John Mulcahy

John Mulcahy

REW Author
Thread Starter
Joined
Apr 3, 2017
Posts
7,996
Builds updated today (beta 51) with these changes:
  • Added: When the "Select group measurements on expand" groups menu option for overlay graphs is not selected the previous selections will be restored when the group expands
  • Added: Measurement right click popup mdat filename and cal filenames info can be copied to the clipboard
  • Added: Measurement right click popup mdat file location can be opened in the OS file dialog
  • Added: Measurement group notes can be formatted (bold, italic, underline) and include links
  • Changed: RTA option to stop at a number of averages can be used with file data
  • Changed: Measurement right click popup on overlays shows the mdat filename and cal filenames
  • Changed: When an mdat file is loaded the overlays selections it had when saved will be restored
  • Fixed: Phase wraps may not be shown correctly on the predicted phase trace
  • Fixed: Typing a value in the SPL & Phase graph right click menu SPL offset control and then clicking Add to data would not add the offset to the data
  • Fixed: Possible exception when generating RT60 data
  • Fixed: Dragging all of a group's measurements onto the same group would cause an exception
  • Fixed: Default smoothing was not applied to the group delay of new measurements
  • Fixed: Cross correlation averaging with the magnitude option was only available when Show distortion was selected
 
HD MOVIE SOURCE

HD MOVIE SOURCE

New Member
Joined
Jun 23, 2021
Posts
45
More  
Preamp, Processor or Receiver
Denon x6500h
Universal / Blu-ray / CD Player
Panasonic UB9000
What does Tuning Frequency achieve? Is it always on? Does it affect sweeps or is it used differently? It's a new setting I believe, just trying to figure out what it does.
TUNING FREQUENCY.png
 
serko70

serko70

Member
Joined
Oct 13, 2017
Posts
286
Location
Germany
More  
Preamp, Processor or Receiver
Marantz SR6015
Main Amp
Rotel Michi X3
DAC
Oppo 205
Computer Audio
Intel NUC
Universal / Blu-ray / CD Player
Oppo 205
Streaming Subscriptions
TIDAL, ROON
Front Speakers
Focal Kanta 2
Center Channel Speaker
Linn Trikan
Surround Speakers
Focal Dome Flax
Surround Back Speakers
Focal Dome Flax
Front Height Speakers
Focal Dome Flax
Rear Height Speakers
Focal Dome Flax
Subwoofers
Focal Sub Air
Video Display Device
LG 65 3D OLED
Strange measurement in Overlays:
View attachment 73239
No operations, only measurments were being taken.
 
serko70

serko70

Member
Joined
Oct 13, 2017
Posts
286
Location
Germany
More  
Preamp, Processor or Receiver
Marantz SR6015
Main Amp
Rotel Michi X3
DAC
Oppo 205
Computer Audio
Intel NUC
Universal / Blu-ray / CD Player
Oppo 205
Streaming Subscriptions
TIDAL, ROON
Front Speakers
Focal Kanta 2
Center Channel Speaker
Linn Trikan
Surround Speakers
Focal Dome Flax
Surround Back Speakers
Focal Dome Flax
Front Height Speakers
Focal Dome Flax
Rear Height Speakers
Focal Dome Flax
Subwoofers
Focal Sub Air
Video Display Device
LG 65 3D OLED
You must log in or register to reply here.

Popular tags

20th century fox 4k blu-ray 4k uhd 4k ultrahd action adventure animated animation bass blu-ray calibration comedy comics denon dirac dirac live disney dolby atmos drama fantasy hdmi 2.1 home theater horror kaleidescape klipsch lionsgate marantz movies onkyo paramount pioneer rew romance sci-fi scream factory shout factory sony stormaudio subwoofer svs terror thriller uhd ultrahd ultrahd 4k universal value electronics warner warner brothers well go usa
Top Bottom